Transparent Acrylic Case for Raspberry Pi 4 Model B Box support Cooling Fan support 3.5 inch LCD
Introduction :
This is the acrylic case for Raspberry Pi 4 Model B , which case install the fan or 3.5 inch LCD. When you install the fan , you can not install the 3.5 inch LCD at the same time. And when you install the 3.5 inch LCD , you need to remove the cover board.
To protect the acrylic from scratch , we stick a layer of film on the surface of case , please remove it before use the case.
This link does not include the Raspberry Pi board and 3.5 inch LCD.
Feature :
1. Made by acrylic , reduce the blocking of Wifi and Bluetooth signal.
2. The transparent color allow you watch the Raspberry Pi board all the time.
3. Support install the cooling fan , and the bottom board has many cooling hole , so this case can provide a good heat dissipation so that the Raspberry Pi working well and longer.
4. When you remove the cover , you can install a GPIO type 3.5 inch LCD on Raspberry Pi by this case.
5. Easy to install , if you has problem with installation , just contact us.
Specification :
1. Material : Acrylic
2. Weight : 60g approx(case) / 70g approx( case with fan )
3. Color : Transparent
4. To preotective the acrylic from scratched , there is a layer of protective film on the surface. Please remove it before use.
5. Use for : Raspberry Pi 4 Model B
Packing List :
Bundle 1 ( case + fan ) :
1 x Acrylic Case ( not include Raspberry Pi )
1 x Cooling Fan
Bundle 2 ( case )
1 x Acrylic Case ( not include Raspberry Pi )
