Argon ONE M.2 Expansion Board USB 3.0 to M.2 SATA SSD Adapter for Raspberry Pi 4 Model B Base for Argon ONE V2/M.2 Case
Introduction:
Argon ONE M.2 Expansion Board extends support for M.2 SATA SSDs to maximize the true potential speeds of your Raspberry Pi 4. You will now be able to boot via an M.2 SATA SSD for faster boot times and larger storage capacity compared to the traditional microSD Card.
To use it, simply replace the bottom of the Argon ONE Case with the expansion board, and the case can now use SSDs. It is recommended to use Raspberry Pi 4 Cases though due to the USB 3.0 ports the boards provide.
Argon ONE M.2 is UASP Supported for the Raspberry Pi 4 which means you can maximize the transfer speeds of your M.2 SATA Drive.
It is compatible with any M.2 SATA SSD with Key-B and Key B&M. ( not for NVME)
Packing List:
Option 1:
1 x M.2 Expansion Board
1 x USB 3.0 Adapter
4 x Non-slip gasket
4 x Screws
( not include case and Raspberry Pi)
Option 2:
1 x M.2 Expansion Board
1 x USB 3.0 Adapter
4 x Non-slip gasket
4 x Screws
1 x 128GB SATA SSD
( not include case and Raspberry Pi)
Option 3:
1 x M.2 Expansion Board
1 x USB 3.0 Adapter
4 x Non-slip gasket
4 x Screws
1 x 512GB SATA SSD
( not include case and Raspberry Pi)
Replacement Base for Argon ONE/Argon ONE V2/Argon Nanosound ONE Case
